Tech Line Coatings Industries, Inc.
  • dvd_logo.jpg
Hover over image to zoom

Internal Coating CBC-1, PowerKote™ (3oz)

Barrier Coatings
non hazardous
No hazard fee for shipping
$33.95 / Each
 
Bargain Fast Shipping Great Idea

FOR: PISTONS COMBUSTION CHAMBERS VALVES *********************** APPLICATION: *All parts mnust be clean of all oils, dirt or other debris. *Blast lightly with 120 grit al oxide or similar hard sharp material at low pressure *Degrease with a non petroleum based solvent. Allow to full evaporate *After STIRRING and shaking apply coating. Spray at an air pressure of about 60 psi through a fine nozzle. *The coating has nearly the same appearance as the blasted part, so apply only enough to give a thin "wet" look to the part. *Allow to dry to a "matte" finish. If humid use a fan or other tool to move air over the part to aid in drying. *Bake at a minimum of 300f for 1 hour. *Inspect part after cure for blisters, cracking or flaking. The coating should have a slight gold tint. *DO NOT ASSEMBLE IF DAMAGE VISIBLE

CBC-1 MSDS cbc-1 msds

CBC-1 Instructions cbc-1 instructions

⚠ WARNING: Cancer - www.P65Warnings.ca.gov

Tell a friend about this product
Include a Note:
Allowed Credit Cards